C&C Block cages?

coolcavies · Nov 22, 2004

Hi,
I am picking up some correx/coroplast tomorrow, I need to build three cages. The space is sort of limited at the moment, so I was trying to think of a way to build the three on top of each other. Really sorry if there are already threads on this, did a search but didn't come up with anything - if you can point me to a thread though that would be great.
Would three cages on top of each other made only from grids and correx, no wood or anything in between the levels be stable? I have cable ties as well as connectors to help secure it.
Also, how would I go about making doors that can open without the whole thing falling down? I was thinking maybe cutting removable panels out of the grids on one side of the cage and securing them with bulldog clips - would that work?
Thanks for any help

mncavylover · Nov 22, 2004

I'm not sure about the stability, and the door would be a bit sharp as it is wire. How about browsing through the galleries? There are many ideas there!

RubyPiggie2 · Nov 24, 2004

It wouldn't be stable at all(sorry!). To make doors, just get some cable ties and put here:
grids-->
--
h h
Does that make sense? Then make the door close from pipe cleaners, binder clip, ect. Cable ties enable the grids to swing instead of staying in place.

Starbucks · Nov 26, 2004

that would have to be a realy high cage.

for the doors, you could use binder clips to keep it closed. very easy and convinient. and if you decide to cut the doors from the grid, in other words cutting a square in the grid panel, you should get the binder edging "thing" to cover the cut parts.

sorry, i forgot what the binder "thing" was actually called. maybe someone else can help you.

coolcavies · Dec 2, 2004

Sorry I haven't replied sooner, I forgot I posted here! Thanks for all the suggestions

I managed to make the block as I'd planned, and I'm thrilled to say that it works really really well! It's very surprisingly sturdy, I am very pleased with it.
Here are a couple of pics

Piglet · Dec 2, 2004

How many guinea pigs are in each cage? How have you made the doors

CavySpirit · Dec 2, 2004

That's 5 square feet per cage.

coolcavies · Dec 3, 2004

There are three in the bottom at the moment (not permanently), one boar in the middle and two sows in the top.

Starbucks · Dec 4, 2004

you should really think about expanding their cages. thats not enough room for them. lianne

CCcages · Dec 4, 2004

But, how do you get at them? Is there a "door", or do you have to disassemble it to clean the cages? How do you get the veggies to them?

Piglet · Dec 4, 2004

Thats what I was thinking. There probably is a door that swings open (maybe on cable ties?)

coolcavies · Dec 6, 2004

you should really think about expanding their cages. thats not enough room for them. lianne

Yes, I am planning on expanding them as soon as I can - my dad said he'll help me build a bigger block of cages (from wood) but it's got to wait until after christmas. They all get floor time in the shed every day, it's the best I can do at the moment

The door I made by cutting a panel out of the front grids, and then attaching another grid over it with cable ties at the top and a binder clip at the bottom, so that it swings up.

Where People & Piggies Thrive

Newbie or Guinea Guru? Popcorn in!

C&C Block cages?

coolcavies

Active Member

mncavylover

Well-known Member

RubyPiggie2

Well-known Member

Starbucks

Well-known Member

coolcavies

Active Member

Piglet

Well-known Member

CavySpirit

Administrator

coolcavies

Active Member

Starbucks

Well-known Member

CCcages

Well-known Member

Piglet

Well-known Member

coolcavies

Active Member

Similar threads

Share this Page

Newest members

Online statistics

Key Resources

Members online