making the cozies
That link had too complicated instructions.....
get the furry pet liner (like from Pet Smart) you can cut to fit, 21" x 11".
get some heavy fabric from the clearance section - heavy duty flannel, cut the same 21" x11"
Pin the 'right' sides together --- basically the furry side will be on the inside -- -
Sew straight stitch down a short side, thendown the long side, down the short side and then on the last long side, leave about 3 - 4" 'hole' gap -- Then you just work on pulling through from the opposite corner out through that hole. Poke out the corners so that they get unbunched. The pin and sew the little hole.
Fold in half with the 'fur' on the inside.
Some people use safety pins to pin the ends, but I consider that a hazard to the GP safety -- so I use the large size heavy duty snaps -- real easy to put on. Put the snaps as close to the edges, at the 2 corners so that they snap together. What is nice about the snaps is that they can withstand the squirming around that the GPs do.
I have 3 for each GP so that while one is being washed I always have spares as a backup. They love these things. I am going to make a bunch of these for an upcoming craft show because they are so different, you don't see them online and they are so much easier to clean than the little beds.
If you don't follow the directions, I'll send pictures.