lissie
Well-known Member
Cavy Slave
- Joined
- Jan 25, 2009
- Posts
- 8,190
- Joined
- Jan 25, 2009
- Messages
- 8,190
Then you can cut the flaps, like this.
Then tape it to make the tray.
Then tape it to make the tray.
Register for free to enjoy the full benefits.
Find out more about the NEW, drastically improved site and forum!
Lissie Thanks so very much, Reases and Dale are going to be so pleased once i get it bedded...You are a life saver..
The walls look okay to me. They are shorter than standard 6" walls, but should be okay. There might be some shavings flying out of the cage.do the walls look to small lissie cause it was a tight fit to get it in there
another thing how much shavings should i put in it and should i put anything under the shavings???
Congrats! Looks good. I was so paranoid when I did my cage. I measured and marked about 4 times before I touched the coroplast with the knife.
I saw Home Depot mentioned above. They also sell this version;
Twinwall Plastic (coroplast);
https://www.homedepot.com/p/72-in-x...Plastic-Sheet-COR-3672/202771364#.UexLU8u9KSM