PDA

View Full Version : cage connectors



acangel228
08-07-04, 05:55 pm
Is it just me or is it hard to push the grids into the tinier side slots of the connectors? I just built a second level and I'm worried that it might come off or something.

mncavylover
08-07-04, 07:05 pm
The connectors are VERY hard to push together. I used a thick dowel as a hammer to get all mine in. If you are worried about stability, you can just use some cable ties along with the connectors to make sure it is really secure. Good luck! =)

cornhill
08-08-04, 09:40 am
Is it just me or is it hard to push the grids into the tinier side slots of the connectors? I just built a second level and I'm worried that it might come off or something.
Use plastic ties at each connector and pull it tight with a pair of pliers. It should pull it right in. It worked for me.