SpoiledlilPigs
Well-known Member
Cavy Slave
- Joined
- Nov 22, 2005
- Posts
- 260
- Joined
- Nov 22, 2005
- Messages
- 260
Use zipties to seccure the grid where you want the door, I used 3 for each door. Then I ziptied a piece of extra coroplast to one side of one of the doors so that it would hold the other door shut. I use a large binder clip to hold my doors shut.
Heres a picture of the door "latch" and out of frame on the very bottom is what holds the intire thing together (the binder clip)
And heres a picture with the doors open on my cage, If you look really closly at the "pivot point" you might see the zipties used to hold the doors onto the cage.
Hope this helped, if you have more questions simply ask.
Oh and WELCOME TO CAVY CAGES!
Heres a picture of the door "latch" and out of frame on the very bottom is what holds the intire thing together (the binder clip)
And heres a picture with the doors open on my cage, If you look really closly at the "pivot point" you might see the zipties used to hold the doors onto the cage.
Hope this helped, if you have more questions simply ask.
Oh and WELCOME TO CAVY CAGES!